• Table 2.1 – Resistivities of common conductors
• Table 2.2 – Resistor color band codes
• Table 2.3 – Capacitor and resistor tolerance codes
• Table 4.1 – Second-order system modeling analogies

• Table 6.1 – Decimal to binary conversion
• Table 6.2 – Hexadecimal symbols and equivalents
• Table 6.3 – Combinational logic operations
• Table 6.4 – Truth table for the RS flip-flop
• Table 6.5 – Positive edge-triggered RS flip-flop truth table
• Table 6.6 – Latch truth table
• Table 6.7 – Positive edge-triggered D flip-flop truth table
• Table 6.8 – Truth for a negative edge-triggered JK flip-flop
• Table 6.9 – Positive edge-triggered T flip-flop truth table
• Table 6.10 – 7490 decade counter BCD coding
• Table 6.11 – 7447 BCD to seven-segment decoder

• Table 7.1 – PIC16F84 pin name descriptions
• Table 7.2 – PIC16F84 instruction set
• Table 7.3 – Selected PicBasic Pro math operators and functions
• Table 7.4 – PicBasic Pro logical comparison operators
• Table 7.5 – PicBasic Pro statement summary (part a, part b, part c, part d)
• Table 7.6 – Arduino-to-PicBasicPro Code Translation Examples (part a, part b, part c, part d, part e, part f)
• Table 7.7 – Liquid crystal display pin descriptions
• Table 7.8 – 5 V power supply options summary
• Table 7.9 – Characteristics for various types of batteries

• Table 8.1 – 2-bit flash converter output
• Table 8.2 – Analog (1–16) and Digital (17–32) pin assignments of the USB 2009
• Table 8.3 – Signal descriptions for the USB 6009

• Table 9.1 – 4-bit gray and natural binary codes
• Table 9.2 – Thermocouple data

• Table 10.1 – Unipolar full-step phase sequence
• Table 10.2 – Unipolar half-step phase sequence
• Table 10.3 – Bipolar full-step phase sequence
• Table 10.4 – Bipolar half-step phase sequence
• Table 10.5 – RC servo motor positions
• Table 10.6 – Comparison of pump characteristics

• Table 11.1 – Ziegler-Nichols recommended gains
• Table 11.2 – Serial port pins

• Table A.1 – SI base units
• Table A.2 – Examples of SI-derived units expressed in terms of base units
• Table A.3 – SI-derived units with special names (supplemental units)
• Table A.4 – Unit prefixes
• Table A.5 – Useful English to SI conversion factors
• Table A.6 – Set of experimental data